Designed to work with all race pedal boxes, racing pedal assemblies, and balance bars, the new patent pending Monit Brake Dial is a remote brake bias adjuster that allows you to easily view, and adjust, the position that your brake bias is set too. Reset the display to ‘zero’ at your preferred position and confidently adjust for changing conditions to gain maximum braking performance – knowing you can accurately return to your starting point if you need to.

Replace your old remote bias adjuster with the new Monit Brake bias Dial and take control of your braking performance.

Easy-to-use. Adjustable driver viewing preference

Turn the dial to adjust your brake bias position, as per as traditional remote bias adjusters, and the Monit Brake Dial will count the ¼ turn ‘clicks’ and display this position. Simply press and hold to ‘zero’ at your preferred setting. This can be shown relative to the FRONT or REAR bias depending on the driver’s preference. Or Absolute position can be selected for alternative uses, such as suspension adjustment.

Compact size. Quick and easy installation.

At 45mm (1.77inches) diameter the Monit Brake bias Dial is compact, and fitment in place of existing bias adjuster knobs is typically a 10minute job. No wiring is required as the Monit Brake Dial is battery powered by a replaceable CR2032 coin cell. Battery life is 18months in normal operation and there is a battery low warning indicator to ensure you’re never caught short during a race or rally.

Universally compatible with all pedal boxes

With 7/16” and 3/8” balance bar adaptors included, the Monit Brake dial is designed to fit to all balance bars and racing pedal boxes. This includes easy fitment to Tilton, Wilwood, AP Racing, Brembo, OBP and Alcon racing pedal assemblies – as well as all other brands. A new Monit flexible shaft cable is included, but often an existing cable can be used if one is already installed.

Bulkhead Mount Version

• 1x M20 black mounting nut
• 1x Inner and outer flexible shaft – 1500mm long
• 5x Cable clamps
• 2x Rotation direction indication labels
• 1x M2 Cheese head anti-rotation fastener
• 2x Balance bar to cable adaptors (7/16” and 3/8” threads)
• 2x Jam nuts (7/16” and 3/8” threads)
• 1x T5 Torx screwdriver